As a representative of artificial tillage, small sowing machines such as peanut automatic sowing machines have gradually entered thousands of households. From the advanced design and advanced conception of the peanut automatic sowing machine, the modern development changes are reflected in the best. Now we introduce the maintenance and maintenance of the peanut automatic sowing machine.
1. The peanut automatic sowing machine should fill the oil injection points in time before work to ensure that the running parts are fully lubricated. Lost or damaged parts should be replenished, replaced and repaired in time. Be careful not to apply oil to the gears and chains to avoid sticking to the soil and increase wear.
2. Each row of seed wheels has the same working length and the same displacement. The automatic sowing machine's sowing volume adjustment mechanism is flexible, and there must be no sliding or air movement.
3. The disc opener disc is flexible to rotate, and must not be shaken, and does not rub against the opener body.
4. Before and after the work, the soil of all parts of the automatic sowing machine should be cleaned, paying special attention to remove the dirt and oil on the transmission system.
5. After the end of each shift, the fertilizer in the automatic sowing machine fertilizer tank should be cleaned to prevent the fertilizer from corroding the fertilizer tank and the fertilizer discharge site. Check if the seed shaft and the fertilizer shaft are flexible.
6. After each shift, the automatic sowing machine should be parked in a dry, covered shed. When parking in the open air, the fertilizer box should be tightly closed. When the container is parked, the ditch is lowered, the device is lowered, and the support is lowered to stabilize the body, so that unnecessary load is reduced on the frame of the automatic sowing machine.
No comments:
Post a Comment