The pets that families now have are different. Some are cats and dogs, some are birds, and there are pigs, dutch rats, and so on. These pets are relatively common. There are even many pets we have never seen. This can be said. It is a challenge to pet feed equipment.
However, pet feed equipment is also constantly being developed to manufacture various types of feed.
According to the current feed development technology and successful experience around the world, three major categories of main feed (cat food, dog food), auxiliary feed, and health feed can be developed. The color and variety of various types of feed must be varied.
First, health feed is a type of feed that adds specific nutrients, can meet the special nutritional needs of animals and can promote body function. Such as taurine fortified feed, calcium feed, dietary fiber, linoleic acid fortified feed and so on.
Secondary, auxiliary feed:
Loquat is a feed with relatively single nutrients and bright colors. Its main role is to regulate appetite, and some are for animals to grind their teeth or lick their plates.
3.Main feed (cat food, dog food):
Requires rich nutrition, good palatability, easy digestion and utilization, easy preservation, and easy to carry. Cat food is mostly made into granular, bread-like, biscuit-like dry food. Dog food is mostly made into dry type, semi-wet type, and wet type.
Semi-wet dog food is mostly meat, dairy products, soybeans, oils, minerals, etc. It is very suitable for puppies just after weaning and can be made into cakes, pies, sausages and other feeds. The characteristic of wet dog feed is that it has very good palatability. Generally, it is made into canned food. Most of the leftovers from meat factories are processed into canned dog food.
These are the development of feed varieties processed by pet feed equipment, which are used to produce various feeds to meet the demand of the public.
Friday, January 3, 2020
Drying and sterilizing function of pet feed equipment
The treatment of pets is even better than that of some people. Now the trend of raising pets is very popular. Many times pets can give people emotional support. Some people often say that pets are more loyal than others. In fact, this is not reasonable. Many people keep pets, and pet feed equipment is getting hotter.
Today I introduce to you the function of drying and sterilizing pet equipment.
First of all, the traditional drying equipment cannot achieve the sterilization effect, and it needs to be dried before sterilization treatment. The drying and sterilization of pet feed equipment under the action of microwaves penetrates the feed to produce thermal and biological effects so that the drying rate of pet feed tends to be consistent. And heating evenly.
The feed itself generates heat, the temperature rises, and it is discharged by a dehumidification system to achieve the purpose of drying.
Moreover, the microwave drying technology does not affect the color, aroma, taste, and structure of the material being dried, and the active ingredients are not easily broken down and destroyed.
Simultaneous biological effects can achieve the purpose of sterilization and mildew prevention, extend the guarantee period of the feed, improve the quality of the feed, and maintain the original color and aroma of the pet feed.
Secondly, the dry sterilization of pet feed equipment also has the advantages of fast sterilization speed, high efficiency, environmental protection, and energy-saving. It can retain the nutritional ingredients in pet feed and is widely used in fish food, dog food, cat food, canned pets, pet meat sauce, etc. Dry sterilization of pet feed.
I will introduce to you that pet feed equipment has the advantages of advanced sterilization function, easy control, and energy-saving. Compared with conventional methods, the equipment is ready to use;
No thermal inertia, flexible and convenient operation, adjustable microwave power and adjustable transmission speed.
With this drying and sterilizing function, the pet feed equipment is better, and pets can grow better.
Community
Today I introduce to you the function of drying and sterilizing pet equipment.
First of all, the traditional drying equipment cannot achieve the sterilization effect, and it needs to be dried before sterilization treatment. The drying and sterilization of pet feed equipment under the action of microwaves penetrates the feed to produce thermal and biological effects so that the drying rate of pet feed tends to be consistent. And heating evenly.
The feed itself generates heat, the temperature rises, and it is discharged by a dehumidification system to achieve the purpose of drying.
Moreover, the microwave drying technology does not affect the color, aroma, taste, and structure of the material being dried, and the active ingredients are not easily broken down and destroyed.
Simultaneous biological effects can achieve the purpose of sterilization and mildew prevention, extend the guarantee period of the feed, improve the quality of the feed, and maintain the original color and aroma of the pet feed.
Secondly, the dry sterilization of pet feed equipment also has the advantages of fast sterilization speed, high efficiency, environmental protection, and energy-saving. It can retain the nutritional ingredients in pet feed and is widely used in fish food, dog food, cat food, canned pets, pet meat sauce, etc. Dry sterilization of pet feed.
I will introduce to you that pet feed equipment has the advantages of advanced sterilization function, easy control, and energy-saving. Compared with conventional methods, the equipment is ready to use;
No thermal inertia, flexible and convenient operation, adjustable microwave power and adjustable transmission speed.
With this drying and sterilizing function, the pet feed equipment is better, and pets can grow better.
Community
Thursday, January 2, 2020
Troubleshooting small groundnut harvesting machine
The small groundnut harvesting machine has a compact structure and is easy to adjust. If there is a failure such as fruit loss during use, an only simple adjustment is required and it can be restored to normal. Now, let's take a look at the troubleshooting of several common faults.
The body is unstable during operation: If the machine feels vibration when the groundnut harvesting machine is operating, it may be that the excavator blades on the two sides of the harvester have inconsistent swings. Machine vibration can also occur if the shovel hits the rear baffle. At this time, we only need to adjust the swing of the shovel on both sides to solve the problem of machine vibration.
The swing of the shovel can be adjusted by adjusting the length of the connecting rod. The connecting rod in front of the V-belt is responsible for the adjustment of the left digging shovel, and the connecting rod in the middle of the two vertical shafts is responsible for adjusting the right digging shovel. Lift the harvester off the ground and let the tractor run at a high speed, loosen the connecting rod lock nut, adjust the corresponding connecting rod, pay attention to observe the swing amplitude of the digging shovel on both sides, and it is advisable to delete the strips on both sides without touching the protective plate until Adjust to the same swing, then lock the nut.
Peanut soil removal is not good: Peanut soil removal is not good, which means that the soil on the harvested peanuts is not shaken. When the groundnut harvesting machine works normally, the soil on the peanuts is shaken, and most of them have been scattered in the soil, reducing artificial soil shake. Labor intensity, so when the soil removal is not good, we need to adjust in time.
The reason why the peanut is not well soiled is that the digging shovel is too deep and the swing strength is reduced. The length of the central tie rod can be adjusted to increase the depth of the digging shovel. Properly shorten the length of the central tie rod so that the rear end of the strip is 3 to 5 cm away from the ground, which solves the problem of poor soil removal.
Many fruits are dropped: Peanuts are the treasures of our farmers' friends. Peanuts fall on the ground. We have to pick them up one by one, so if you find that the harvester digs out the peanuts, you will have to drop them. Timely adjustments.
The reason for falling fruit is that the digging is too high. It can also be adjusted by adjusting the central rod. Contrary to the poor adjustment method, the length of the central rod can be extended to solve the problem. The problem.
Talking about the maintenance and maintenance of small peanut harvester
The maintenance of a small peanut harvester is an important task. Careful maintenance can increase the utilization rate of the machine and extend the life of the machine. The maintenance of small peanut harvester mainly includes the following aspects.
Inspection and maintenance after shift work: After each shift is completed, return to the home, first remove the dirt on the harvester components to prevent the machine from rusting, then open the hood and carefully remove the weeds around each component.
After using the peanut harvester for a week, grease the universal joints and bearings, and check and supplement other lubrication points.
Check the belt of the peanut harvester for wear. If the belt of the harvester is severely worn, replace it with a new one in a timely manner.
Peanut soil removal is not good: Peanut soil removal is not good, which means that the soil on the harvested peanuts is not shaken. When the peanut harvester works normally, the soil on the peanuts is shaken, and most of them have been scattered in the soil, reducing artificial soil shake. Labor intensity, so when the soil removal is not good, we need to adjust in time.
The reason why the peanut is not well soiled is that the digging shovel is too deep and the swing strength is reduced. The length of the central tie rod can be adjusted to increase the depth of the digging shovel. Properly shorten the length of the central tie rod so that the rear end of the strip is 3 to 5 cm away from the ground, which solves the problem of poor soil removal.
Inspection and maintenance after each season of operation: After the completion of each season of operation, not only must the machine be cleaned up, but the triangle belt must also be relaxed.
After checking and replacing the bearing of each running part, add more butter.
When storing, choose a place that is ventilated and shaded, and pad the rack with bricks or other items to keep the excavator and depth-limiting wheel off the ground. Finally, cover the peanut harvester with plastic cloth.
Inspection and maintenance after shift work: After each shift is completed, return to the home, first remove the dirt on the harvester components to prevent the machine from rusting, then open the hood and carefully remove the weeds around each component.
After using the peanut harvester for a week, grease the universal joints and bearings, and check and supplement other lubrication points.
Check the belt of the peanut harvester for wear. If the belt of the harvester is severely worn, replace it with a new one in a timely manner.
Peanut soil removal is not good: Peanut soil removal is not good, which means that the soil on the harvested peanuts is not shaken. When the peanut harvester works normally, the soil on the peanuts is shaken, and most of them have been scattered in the soil, reducing artificial soil shake. Labor intensity, so when the soil removal is not good, we need to adjust in time.
The reason why the peanut is not well soiled is that the digging shovel is too deep and the swing strength is reduced. The length of the central tie rod can be adjusted to increase the depth of the digging shovel. Properly shorten the length of the central tie rod so that the rear end of the strip is 3 to 5 cm away from the ground, which solves the problem of poor soil removal.
Inspection and maintenance after each season of operation: After the completion of each season of operation, not only must the machine be cleaned up, but the triangle belt must also be relaxed.
After checking and replacing the bearing of each running part, add more butter.
When storing, choose a place that is ventilated and shaded, and pad the rack with bricks or other items to keep the excavator and depth-limiting wheel off the ground. Finally, cover the peanut harvester with plastic cloth.
Subscribe to:
Comments (Atom)