Due to the regional differentiation, large-scale threshers can not be entered in some areas, such as remote mountain villages and farmers living in the mountains. At this time, the small corn thresher solves the problem of farmers for these farmers.
After many farmers in their lives bought a small corn thresher, they still don't know how to use it properly. This article will explain how to use a small thresher in the following aspects.
1. Level the four feet of the equipment to ensure a smooth and firm. To reduce vibration.
2. If the motor is used as the power, it is necessary to check whether the power cord is firmly connected, tightly wrapped and installed with the ground wire.
3. Feed the corn cob continuously and evenly, and the feeding amount should be suitable. If the feeding is intermittent, it will affect production efficiency. If the feeding amount is too much, the machine will be stuck and overloaded, which will cause the motor to burn and damage the equipment.
4. The water content of the threshed corn cob should not exceed 20%, and the water content is too high to reach the normal threshing effect.
5. Before the end of the work, the corn cobs that have been put into operation will be completely cleaned and discharged, and then the load will be stopped.
The joint of the rotating belt should be firm; it is strictly forbidden to pick up the belt or touch any object to the east when the machine is running.
6. It is necessary to pay attention to the rotation ratio between the supporting power and the thresher to meet the requirements, so as to avoid personal injury caused by the high speed of the thresher, the rotation is severe, the parts are damaged or the loosening of the product is loose.
7, can not continue to work for too long, generally work about 8 hours to stop inspection, adjustment, and lubrication, to prevent friction caused by wear, heat and deformation.
8. The thresher is generally powered by a diesel engine. A fire hood should be worn on the exhaust pipe to prevent fire.
9. If the threshing machine has a fault during the operation, it should be stopped and repaired and adjusted.
The above is the correct use of the small thresher. The corn thresher produced by the factory is bulky and not suitable for the farmers in the mountainous area. For mountainous areas with developed roads, the automatic corn thresher can also meet the needs of farmers for threshing.
No comments:
Post a Comment